How to connect Zaptec Pro to network

Depending on the installation, Zaptec Pro can be connected to Wi-Fi, LTE, or PLC networks. If the charger is not set up with a Wi-Fi or PLC network, it will automatically use the cellular network 4G LTE-M available.

 

Connect to Wi-Fi 

  1. From Dashboard, tap the three-dot icon at the top-right
  2. Select Configure products and use the PIN code to connect to the charger via Bluetooth
  3. Scroll down to Network Settings 
  4. Tap Switch to Wi-Fi or Connect to Wi-Fi  
    A search screen is shown
  5. Find the network you want to use and fill in the password
  6. Tap Save

Switch_to_wifi.pngChoose_wifi_network_copy.png

Find out more about Wi-Fi connection and recommendations 

 

 

Connect to PLC

  1. From Dashboard, tap the three-dot icon at the top-right
  2. Select Configure products and use the PIN code to connect to the charger via Bluetooth
  3. Scroll down to Network Settings
  4. Tap Configure PLC
  5. Tap Scan network name
    Use the camera to scan the QR code on the PLC module. iPhone users can upload images from gallery
  6. Tap Save to connect to network

PLC_scan_network_name_app.jpg

Find out more about PLC network and setup 

 

Connect to 4G LTE-M

  1. From Dashboard, tap the three-dot icon at the top-right
  2. Select Configure products and use the PIN code to connect to the charger via Bluetooth
  3. Scroll down to Network Settings 
  4. Tap Connect to 4G
  5. Tap Save

Connect_to_4g.jpg6.5-inch_Screenshot_1_copy_3.png

Find out more about the Telenor 4G LTE-M network

 

 

 

Was this article helpful?
4 out of 10 found this helpful